Efficient refining agent
In view of the fact that many domestic electrolytic aluminum plants mostly inject raw aluminum liquid directly into the mixing furnace, and produce aluminum alloys, aluminum bus bars, electrical aluminum rods and cast-rolled aluminum plates after processing. Because there are a lot of inclusions such as electrolyte in the aluminum liquid, and the aluminum liquid contains a large amount of hydrogen. Therefore, a high-performance refining agent is needed to process aluminum melt. The high-efficiency refining agent is widely used and welcomed by many manufacturers with its good slag removal and degassing performance.
◆Technical parameters
● Model: RH-JL
● Shape: white powder, particle size <20 mesh, moisture content below 0.5.
● Scope of application: aluminum and aluminum alloys other than high-magnesium alloys.
● Operating temperature: greater than 680°C.
● Reference dosage: add according to 0.1-0.2% of the total weight of the melt.
◆ How to use
Powder form: Sprinkle directly in the mixing furnace or in the open aluminum water sub-package, and stir evenly.
Cylindrical shape: Use the bell jar to press into the mixing furnace or the open molten aluminum sub-package in batches to move horizontally until the molten aluminum does not roll and gas.
◆ Main advantages
Both adsorption slagging and compounding slagging. The good degassing effect of hexachloroethane is sufficient to ensure that a relatively pure aluminum melt is obtained.
◆Packaging and storage
Corrugated carton packaging: 20-25 kg per carton.
Keep it properly and keep it away from moisture.
EN
CN
